China Good quality Yej Series 3 Phase AC Induction Electric Motor with DC Magnetic Braking supplier

Product Description

Product Description

YEJ2 series electromatic-brake motors are improved products on the base of YEJ series. The technical properties of its motor conform to htere quirements of Y2 series. The performance of the brake assembly are improved. YEJ2 can make action proptly when the power of electric motor is off.

Motors of this series can continuously run at the rated power under the following conditions:
1. Altitude: Above sea level, not exceeding 1000m.
2. Ambient temperature: It varies with seasons but not exceeding +40° C
3. Voltage: 220/380V, 380/660V
4. Frequency: 50Hz, 60Hz.
5. Connection: Y-Connection for 3kw and below whereas; Delta-connection for 4 kw and above.
6. Duty: Continuous(S1)
7. Insulation Class: B, F
8. Protection: IP44, IP55 or IP54
 

Technical data-YEJ series motor-2 poles -380v/50HZ
type Rated output Full Load Static braking torque Max.braking time at No-load Brake power
Speed Input Current Efficiency PowTypeer factor
KW HP RPM Amp Eff.% P.F N.m S W
YEJ80M1-2 0.75 1.0  2825 1.81 75 0.84 7.5 0.20  50
YEJ80M2-2 1.1 1.5 2825 2.52 77 0.86 7.5 0.20  50
YEJ90S-2 1.5 2.0  2840 3.44 78 0.85 15 0.20  60
YEJ90L-2 2.2 3.0  2840 4.83 80.5 0.86 15 0.20  60
YEJ100L-2 3 4.0  2870 6.39 82 0.87 30 0.20  80
YEJ112M-2 4 5.5 2880 8.17 85.5 0.87 40 0.25 110
YEJ132S1-2 5.5 7.5 2900 11.10  85.5 0.88 75 0.25 130
YEJ132S2-2 7.5 10.0  2900 15.00  86.2 0.88 75 0.25 130
YEJ160M1-2 11 15 2930 21.80  87.2 0.88 150 0.35 150
YEJ160M2-2 15 20 2930 29.40  88.2 0.88 150 0.35 150
YEJ160L-2 18.5 25 2930 35.50  89.0  0.89 150 0.35 150
YEJ180M-2 22 30 2940 42.20  89.0  0.89 200 0.35 150
YEJ200L1-2 30 40 2950 56.90  90.0  0.89 300 0.45 200
YEJ200L2-2 37 50 2950 69.80  90.5 0.89 300 0.45 200
YEJ225M-2 45 60 2960 83.90  91.5 0.89 450 0.45 200
                   
Technical data-YEJ series motor-4 poles -380v/50HZ
Type Rated output Full Load Static braking torque Max.braking time at No-load Brake power
Speed Input Current Efficiency Power factor
KW HP RPM Amp Eff.% P.F N.m S W
YEJ80M1-4 0.55 0.75 1390 1.51 73.0  0.76 7.5 0.20  50
YEJ80M2-4 0.75 1.0  1390 2.01 74.5 0.76 7.5 0.20  50
YEJ90S-4 1.1 1.5 1400 2.75 78.0  0.78 15 0.20  60
YEJ90L-4 1.5 2.0  1400 3.65 79.0  0.79 15 0.20  60
YEJ100L1-4 2.2 3.0  1420 5.03 81.0  0.82 30 0.20  80
JET100L2-4 3.0  4.0  1420 6.82 82.5 0.81 30 0.20  80
YEJ112M-4 4.0  5.5 1440 8.77 84.5 0.82 40 0.25 110
YEJ132S-4 5.5 7.5 1440 11.60  85.5 0.84 75 0.25 130
YEJ132M-4 7.5 10.0  1440 15.40  87.0  0.85 75 0.25 130
YEJ160M-4 11 15 1460 22.60  88.0  0.84 150 0.35 150
YEJ160L-4 15 20 1460 30.30  88.5 0.85 150 0.35 150
YEJ180M-4 18.5 25 1465 35.90  91.0  0.86 200 0.35 150
YEJ180L-4 22 30 1465 42.50  91.5 0.86 200 0.35 150
YEJ200L-4 30 40 1470 56.80  92.2 0.87 300 0.45 200
YEJ225S-4 37 50 1475 70.40  91.8 0.87 450 0.45 200
YEJ225M-4 45 60 1475 84.20  92.3 0.88 450 0.45 200
                   
Technical data-YEJ series motor-6 poles -380v/50HZ
Type Rated output Full Load Static braking torque Max.braking time at No-load Brake power
Speed Input Current Efficiency Power factor
KW HP RPM Amp Eff.% P.F N.m S W
YEJ90S-6 0.75 1.0  910 2.25 72.5 0.7 15 0.2 60
YEJ90L-6 1.1 1.5 910 3.16 73.5 0.72 15 0.2 60
YEJ100L-6 1.5 2.0  930 3.97 77.5 0.74 30 0.2 80
YEJ112M-6 2.2 3.0  940 5.61 80.5 0.74 40 0.25 110
YEJ132S-6 3.0  4.0  960 7.23 83.0  0.76 75 0.25 130
YEJ132M1-6 4.0  5.5 960 9.40  84.0  0.77 75 0.25 130
YEJ132M2-6 5.5 7.5 960 12.60  85.3 0.78 75 0.25 130
YEJ160M-6 7.5 10.0  970 17.00  86.0  0.78 150 0.35 150
YEJ160L-6 11 15 970 24.60  87.0  0.78 150 0.35 150
YEJ180L-6 15 20 970 31.40  89.5 0.81 200 0.35 150
YEJ200L1-6 18.5 25 975 37.70  89.8 0.83 300 0.45 200
YEJ200L2-6 22 30 975 44.60  90.2 0.83 300 0.45 200
YEJ225M-6 30 40 980 59.50  92.2 0.85 450 0.45 200

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price 
What we do:
1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,
 

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial ,Universal ,etc
Speed: Constant Speed
Number of Stator: Three-Phase
Function: Control
Casing Protection: Protection Type
Number of Poles: 2.4.6.8p
Samples:
US$ 246/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

dc motor

What are the key differences between brushed and brushless DC motors?

Brushed and brushless DC motors are two distinct types of motors that differ in their construction, operation, and performance characteristics. Here’s a detailed explanation of the key differences between brushed and brushless DC motors:

1. Construction:

Brushed DC Motors: Brushed DC motors have a relatively simple construction. They consist of a rotor with armature windings and a commutator, and a stator with permanent magnets or electromagnets. The commutator and brushes make physical contact to provide electrical connections to the armature windings.

Brushless DC Motors: Brushless DC motors have a more complex construction. They typically consist of a stationary stator with permanent magnets or electromagnets and a rotor with multiple coils or windings. The rotor does not have a commutator or brushes.

2. Commutation:

Brushed DC Motors: In brushed DC motors, the commutator and brushes are responsible for the commutation process. The brushes make contact with different segments of the commutator, reversing the direction of the current through the armature windings as the rotor rotates. This switching of the current direction generates the necessary torque for motor rotation.

Brushless DC Motors: Brushless DC motors use electronic commutation instead of mechanical commutation. The commutation process is managed by an external electronic controller or driver. The controller determines the timing and sequence of energizing the stator windings based on the rotor position, allowing for precise control of motor operation.

3. Efficiency:

Brushed DC Motors: Brushed DC motors tend to have lower efficiency compared to brushless DC motors. This is primarily due to the energy losses associated with the brushes and commutation process. The friction and wear between the brushes and commutator result in additional power dissipation and reduce overall motor efficiency.

Brushless DC Motors: Brushless DC motors are known for their higher efficiency. Since they eliminate the use of brushes and commutators, there are fewer energy losses and lower frictional losses. The electronic commutation system allows for precise control of the motor’s operation, maximizing efficiency and reducing power consumption.

4. Maintenance:

Brushed DC Motors: Brushed DC motors require regular maintenance due to the wear and tear of the brushes and commutator. The brushes need periodic replacement, and the commutator requires cleaning to maintain proper electrical contact. The maintenance requirements contribute to additional costs and downtime for brushed DC motors.

Brushless DC Motors: Brushless DC motors have a relatively maintenance-free operation. As they do not have brushes or commutators, there is no need for brush replacement or commutator cleaning. This results in reduced maintenance costs and increased reliability of brushless DC motors.

5. Speed Control:

Brushed DC Motors: Brushed DC motors offer simpler speed control options. The speed can be controlled by adjusting the applied voltage or by varying the resistance in the armature circuit. This allows for relatively straightforward speed regulation.

Brushless DC Motors: Brushless DC motors provide more advanced and precise speed control capabilities. The speed can be controlled through the electronic commutation system by adjusting the timing and sequence of the stator windings’ energization. This allows for precise control of the motor’s speed and acceleration.

These key differences between brushed and brushless DC motors make each type suitable for different applications depending on factors such as efficiency requirements, maintenance considerations, and control complexity.

dc motor

Can DC motors be used in renewable energy systems, such as wind turbines or solar tracking systems?

Yes, DC (Direct Current) motors can be effectively used in various renewable energy systems, including wind turbines and solar tracking systems. The unique characteristics and advantages of DC motors make them well-suited for these applications. Here’s a detailed explanation of how DC motors can be utilized in renewable energy systems:

1. Wind Turbines:

DC motors can be employed in wind turbines to convert the mechanical energy of the wind into electrical energy. There are two common configurations:

a. Direct Drive Wind Turbines:

In direct drive wind turbines, the rotor of the turbine is directly connected to a DC generator. The rotor’s rotational motion is transmitted directly to the generator, which produces DC electrical power. DC motors can be used as DC generators in this configuration. The advantage of using DC motors/generators is their simplicity, reliability, and ability to operate efficiently at variable speeds, which is beneficial in varying wind conditions.

b. Hybrid Wind Turbines:

Hybrid wind turbines combine both aerodynamic and electrical conversion systems. In this configuration, DC motors can be utilized for the pitch control mechanism and yaw control system. The pitch control mechanism adjusts the angle of the turbine blades to optimize performance, while the yaw control system enables the turbine to align itself with the wind direction. DC motors provide precise control and responsiveness required for these functions.

2. Solar Tracking Systems:

DC motors are commonly employed in solar tracking systems to maximize the efficiency of solar panels by optimizing their orientation towards the sun. There are two main types of solar tracking systems:

a. Single-Axis Solar Tracking Systems:

Single-axis solar tracking systems adjust the inclination of solar panels along a single axis (typically the east-west axis) to track the movement of the sun throughout the day. DC motors can be used to drive the rotation mechanism that adjusts the panel’s tilt angle. By continuously adjusting the panel’s position to face the sun directly, the solar energy harvested can be significantly increased, resulting in higher energy output compared to fixed solar panel installations.

b. Dual-Axis Solar Tracking Systems:

Dual-axis solar tracking systems adjust the inclination of solar panels along both the east-west and north-south axes to track the sun’s movement throughout the day and throughout the year. DC motors are utilized in the rotation mechanisms for both axes. This type of solar tracking system provides the highest possible energy yield by keeping the solar panels perpendicular to the sun’s rays at all times, maximizing the exposure to sunlight.

DC motors are preferred in renewable energy systems due to their advantages, including:

  • Efficiency at Variable Speeds: DC motors can operate efficiently at varying speeds, making them suitable for applications with fluctuating wind speeds or changing solar angles.
  • Control and Precision: DC motors offer precise control and responsiveness, allowing for accurate tracking and adjustment in wind turbines and solar tracking systems.
  • Reliability: DC motors are known for their reliability, with fewer moving parts compared to other motor types, reducing the risk of failure in remote or harsh environments.
  • Compatibility with Energy Storage Systems: DC motors can easily be integrated with energy storage systems, such as batteries or supercapacitors, to store excess electrical energy generated by wind turbines or solar panels.

In conclusion, DC motors can be effectively utilized in renewable energy systems such as wind turbines and solar tracking systems. Their efficiency, control capabilities, reliability, and compatibility with energy storage systems make them a suitable choice for these applications, contributing to the advancement of sustainable energy generation.

dc motor

How does the size and power rating of a DC motor affect its suitability for different tasks?

The size and power rating of a DC (Direct Current) motor play crucial roles in determining its suitability for different tasks and applications. The size and power rating directly impact the motor’s performance characteristics, including its torque output, speed range, efficiency, and overall capabilities. Here’s a detailed explanation of how the size and power rating of a DC motor affect its suitability for different tasks:

Size of DC Motor:

The size of a DC motor refers to its physical dimensions, including its diameter, length, and overall volume. The size of the motor influences its ability to fit into specific spaces or applications with space constraints. Here are some key considerations regarding the size of a DC motor:

1. Space Limitations: In applications where space is limited, such as small robotic systems or compact machinery, smaller-sized DC motors are preferred. These motors provide a more convenient and efficient integration into the overall system design.

2. Weight Constraints: Certain applications, such as drones or lightweight robots, may have strict weight limitations. Smaller-sized DC motors are generally lighter, making them more suitable for weight-sensitive tasks where minimizing the overall system weight is essential.

3. Cooling and Heat Dissipation: The size of a DC motor can impact its ability to dissipate heat generated during operation. Smaller-sized motors may have less surface area for heat dissipation, which can lead to increased operating temperatures. In contrast, larger-sized motors typically have better heat dissipation capabilities, allowing for sustained operation under heavy loads or in high-temperature environments.

Power Rating of DC Motor:

The power rating of a DC motor refers to the maximum power it can deliver or the power it consumes during operation. The power rating determines the motor’s capacity to perform work and influences its performance characteristics. Here are some key considerations regarding the power rating of a DC motor:

1. Torque Output: The power rating of a DC motor is directly related to its torque output. Higher power-rated motors generally provide higher torque, allowing them to handle more demanding tasks or applications that require greater force or load capacity. For example, heavy-duty industrial machinery or electric vehicles often require DC motors with higher power ratings to generate sufficient torque for their intended tasks.

2. Speed Range: The power rating of a DC motor affects its speed range capabilities. Motors with higher power ratings can typically achieve higher speeds, making them suitable for applications that require rapid or high-speed operation. On the other hand, lower power-rated motors may have limited speed ranges, making them more suitable for applications that require slower or controlled movements.

3. Efficiency: The power rating of a DC motor can impact its efficiency. Higher power-rated motors tend to have better efficiency, meaning they can convert a larger proportion of electrical input power into mechanical output power. Increased efficiency is desirable in applications where energy efficiency or battery life is a critical factor, such as electric vehicles or portable devices.

4. Overload Capability: The power rating of a DC motor determines its ability to handle overloads or sudden changes in load conditions. Motors with higher power ratings generally have a greater overload capacity, allowing them to handle temporary load spikes without stalling or overheating. This characteristic is crucial in applications where intermittent or varying loads are common.

Overall, the size and power rating of a DC motor are important factors in determining its suitability for different tasks. Smaller-sized motors are advantageous in space-constrained or weight-sensitive applications, while larger-sized motors offer better heat dissipation and can handle heavier loads. Higher power-rated motors provide greater torque, speed range, efficiency, and overload capability, making them suitable for more demanding tasks. It is crucial to carefully consider the specific requirements of the application and choose a DC motor size and power rating that aligns with those requirements to ensure optimal performance and reliability.

China Good quality Yej Series 3 Phase AC Induction Electric Motor with DC Magnetic Braking   supplier China Good quality Yej Series 3 Phase AC Induction Electric Motor with DC Magnetic Braking   supplier
editor by CX 2024-05-16