BLM57050-a thousand+ACS606 Apps
Suited for small to medium automation machinery and equipment, such as large format printers, engraving equipment, electronics production equipment, pick and location equipment, packing equipment, and and so forth. Particularly suited to applications requiring high velocity, substantial precision, high trustworthiness and low motor noise.
CZPT Requirements:
Winding connection: Delta relationship
Corridor Sensor: 120
Pole Pairs (-): 2
Stage: 3
Shaft Radial Engage in: 0.571 mm
Shaft Axial Perform: 0.571 mm@460g
Allowable radial load: 75N@20mm from the flange
Allowable axial load: 15N
Isolation Stage: Class B
Isolation Toughness: 500VDC for a single moment
Isolation Resistance: 100M ohms
Requirements
|
BLM57571 |
BLM57050 |
BLM57090 |
BLM57130 |
BLM57180 |
57BL180 |
rated voltage |
24VDC |
24VDC |
36VDC |
36VDC |
36VDC |
36VDC |
rated power |
25W |
50W |
90W |
130W |
180W |
180W |
nominal torque |
.08NM |
.16NM |
.29NM |
.41NM |
.57NM |
.43NM |
peak torque |
.24NM |
.48NM |
.87NM |
1.23NM |
one.71NM |
1.27NM |
rated velocity |
3000RPM |
3000RPM |
3000RPM |
3000RPM |
3000RPM |
3000RPM |
Rated armature present |
one.6A |
3A |
3.45A |
five.3A |
6.7A |
7A |
Peak Existing |
4.8A |
9A |
ten.35A |
15.9A |
20A |
twenty.5A |
Torque Const. |
.05 N.M/A |
.053 N.M/A |
.084 N.M/A |
.078 N.M/A |
.085 N.M/A |
.063 N.M/A |
Back again EMF Const. |
5.2 V/RPM |
5.fifty five V/RPM |
eight.8 V/RPM |
8.2 V/RPM |
eight.nine V/RPM |
6.six V/RPM |
Resistance |
1.seventy three ohms |
.88 ohms |
one.35 ohms |
.sixty three ohms |
.9 ohms |
.35 ohms |
Inductance |
3.36mh |
2.2 mh |
four.one mh |
two.17 mh |
2 mh |
1 mh |
Inertia |
thirty kgm2x10-4 |
75 kgm2x10-4 |
119 kgm2x10-4 |
173 kgm2x10-four |
230 kgm2x10-four |
230 kgm2x10-4 |
Motor Length |
45mm |
55mm |
75mm |
95mm |
115mm |
115mm |
Excess weight |
.25Kg |
.five Kg |
.75 Kg |
1 Kg |
1.25 Kg |
1.twenty five Kg |
Brushless Servo Generate ACS306 Genneral Introduction
Leadshine’s fully digital ACS and ACH sequence servo drives are developed with 32-little bit DSP control technological innovation based on sophisticated handle algorithm.Due to the fact of their higher overall performance and hugely competitive price, they are ideal for changing many well-liked AC servo drives CZPT on the market.The AC servo drives accept enter commands of PUL/DIR indicators, so they can be employed to up grade stepping drives to ACS and ACH collection servo drives CZPT modifying manage methods, supplying increased precision, higher velocity, reduce heating and reduced sounds functionality.
Eletric lectrical Technical specs (Tj = 25oC/77oF)
Parameters |
ACS306 |
ACS606 |
ACS806 |
Maximum Steady Electricity |
150W |
200W |
400W |
Maximum Continuous Recent |
6A |
6A |
6A |
Peak Current |
15A |
18A |
18A |
Enter Voltage |
eighteen~thirty VDC |
eighteen~sixty VDC |
twenty~eighty VDC |
Logial Sign Input Existing |
seven ~twenty mA |
seven ~20 mA |
7 ~twenty mA |
Pulse Enter Frequency |
~250KHz |
~250KHz |
~600KHz |
Isolation Resistance |
500 M ohm |
500 M ohm |
five hundred M ohm |
Recent Presented Encoder |
100mA |
100mA |
100mA |
Command Enter |
Action/Path |
Phase/Course |
Stage/Course |
Empower/Disable input |
Differential |
Differential |
Differential |
Finish Limit input |
NO |
NO |
Optimistic Adverse |
Alam sign output |
Isolated OC output |
NO |
Isolated OC output |
In Place signal output |
No |
NO |
Isolated OC output |
Corridor Impact Sensor Comments |
U V W (Solitary-finished) |
U V W (Solitary-ended) |
U V W (Solitary-ended) |
Encoder Opinions |
A B Z (Differential) |
A B Z (Differential) |
A B Z (Differential) |
Encoder output |
NO |
NO |
A B Z (Differential) |
Interaction interface |
RS232 |
RS232 |
RS232 |
Braking Resistor |
NO |
NO |
Assist extmal B |